FEASIBILITY AND EFFICIENCY ANALYSIS OF FOOTSTEP ENERGY HARVESTING TILES IN UNIVERSITY HALLWAYS
Keywords:
piezoelectric energy harvesting, footstep tile, PZT, supercapacitor, smart campus, energy conversion efficiency, return on investmentAbstract
As universities pursue smart, sustainable infrastructure, the ambient kinetic energy of high-traffic hallways offers a way to reduce reliance on the conventional power grid. Empirical data on the conversion efficiency, storage behavior, and financial viability of footstep harvesters under real pedestrian traffic remain scarce. This study evaluates the technical feasibility, energy conversion efficiency, and economic viability of a piezoelectric footstep energy-harvesting tile deployed in a high-density university hallway. We fabricated a prototype tile incorporating a 4 × 4 array of PZT-5H (lead zirconate titanate) transducers, bridge rectifiers, a buck-boost converter, and a supercapacitor bank, and flush-mounted it in an engineering-building hallway for a 5-day observation period. We combined controlled tests (pedestrian masses of 50 to 95 kg; cadences of 1.0 to 2.5 Hz) and uncontrolled logging of natural traffic with a cost-benefit analysis. An average footfall under a mean impact force of 650 N produced a peak output voltage of 14.2 V and an instantaneous power of 28.4 mW. Peak voltage increased linearly with pedestrian mass (9.8 to 20.8 V for 50 to 95 kg), and higher cadence raised the energy accumulation rate by 38%. At the optimum load of 10 kΩ, the maximum conversion efficiency was 11.4%. At a daily footfall density of 12,000 steps, the tile yielded 11.4 Wh (0.95 mWh per step), sufficient to continuously power low-power hallway auxiliary sensors and LED emergency indicators. A 10-tile installation (US$850) had an estimated payback period of 4.2 years. The findings support the technical and economic feasibility of scaling kinetic harvesting tiles across university corridors, with a projected return on investment (ROI) within 4.2 years of continuous operation. Multi-site, longer-duration validation is needed to confirm durability and generalizability.
References
Alshuwaikhat, H. M., & Abubakar, I. (2008). An integrated approach to achieving campus sustainability: Assessment of the current campus environmental management practices. Journal of Cleaner Production, 16(16), 1777–1785. https://doi.org/10.1016/j.jclepro.2007.12.002
Anton, S. R., & Sodano, H. A. (2007). A review of power harvesting using piezoelectric materials (2003–2006). Smart Materials and Structures, 16(3), R1–R21. https://doi.org/10.1088/0964-1726/16/3/R01
Asadi, M., Ahmadi, R., & Abazari, A. M. (2023). Footstep-powered floor tile: Design and evaluation of an electromagnetic frequency up-converted energy harvesting system enhanced by a cylindrical Halbach array. Sustainable Energy Technologies and Assessments, 60, Article 103571. https://doi.org/10.1016/j.seta.2023.103571
Cascetta, F., Lo Schiavo, A., Minardo, A., Musto, M., Rotondo, G., & Calcagni, A. (2018). Analysis of the energy extracted by a harvester based on a piezoelectric tile. Current Applied Physics, 18(8), 905–911. https://doi.org/10.1016/j.cap.2018.04.015
Du, S., Jia, Y., & Seshia, A. A. (2017). Piezoelectric vibration energy harvesting: A connection configuration scheme to increase operational range and output power. Journal of Intelligent Material Systems and Structures. https://doi.org/10.1177/1045389X16682846
Elhalwagy, A. M., Ghoneem, M. Y. M., & Elhadidi, M. (2017). Feasibility study for using piezoelectric energy harvesting floor in buildings’ interior spaces. Energy Procedia, 115, 114–126. https://doi.org/10.1016/j.egypro.2017.05.012
Guan, M. J., & Liao, W. H. (2007). On the efficiencies of piezoelectric energy harvesting circuits towards storage device voltages. Smart Materials and Structures, 16(2), 498–505. https://doi.org/10.1088/0964-1726/16/2/031
Guan, M. J., & Liao, W. H. (2008). Characteristics of energy storage devices in piezoelectric energy harvesting systems. Journal of Intelligent Material Systems and Structures, 19(6), 671–680. https://doi.org/10.1177/1045389X07078969
Guyomar, D., Badel, A., Lefeuvre, E., & Richard, C. (2005). Toward energy harvesting using active materials and conversion improvement by nonlinear processing. IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 52(4), 584–595. https://doi.org/10.1109/TUFFC.2005.1428041
He, M., Wang, S., Zhong, X., & Guan, M. (2019). Study of a piezoelectric energy harvesting floor structure with force amplification mechanism. Energies, 12(18), Article 3516. https://doi.org/10.3390/en12183516
Hwang, S. J., Jung, H. J., Kim, J. H., Ahn, J. H., Song, D., Song, Y., Lee, H. L., Moon, S. P., Park, H., & Sung, T. H. (2015). Designing and manufacturing a piezoelectric tile for harvesting energy from footsteps. Current Applied Physics, 15(6), 669–674. https://doi.org/10.1016/j.cap.2015.02.009
Keller, T. S., Weisberger, A. M., Ray, J. L., Hasan, S. S., Shiavi, R. G., & Spengler, D. M. (1996). Relationship between vertical ground reaction force and speed during walking, slow jogging, and running. Clinical Biomechanics, 11(5), 253–259. https://doi.org/10.1016/0268-0033(95)00068-2
Kim, H. S., Kim, J.-H., & Kim, J. (2011). A review of piezoelectric energy harvesting based on vibration. International Journal of Precision Engineering and Manufacturing, 12(6), 1129–1141. https://doi.org/10.1007/s12541-011-0151-3
Lefeuvre, E., Badel, A., Richard, C., & Guyomar, D. (2005). Piezoelectric energy harvesting device optimization by synchronous electric charge extraction. Journal of Intelligent Material Systems and Structures, 16(10), 865–876. https://doi.org/10.1177/1045389X05056859
Li, X., & Strezov, V. (2014). Modelling piezoelectric energy harvesting potential in an educational building. Energy Conversion and Management, 85, 435–442. https://doi.org/10.1016/j.enconman.2014.05.096
Moussa, R. R., Ismaeel, W. S. E., & Solban, M. M. (2022). Energy generation in public buildings using piezoelectric flooring tiles: A case study of a metro station. Sustainable Cities and Society, 77, Article 103555. https://doi.org/10.1016/j.scs.2021.103555
Ottman, G. K., Hofmann, H. F., Bhatt, A. C., & Lesieutre, G. A. (2002). Adaptive piezoelectric energy harvesting circuit for wireless remote power supply. IEEE Transactions on Power Electronics, 17(5), 669–676. https://doi.org/10.1109/TPEL.2002.802194
Panthongsy, P., Isarakorn, D., Janphuang, P., & Hamamoto, K. (2018). Fabrication and evaluation of energy harvesting floor using piezoelectric frequency up-converting mechanism. Sensors and Actuators A: Physical, 279, 321–330. https://doi.org/10.1016/j.sna.2018.06.035
Safaei, M., Sodano, H. A., & Anton, S. R. (2019). A review of energy harvesting using piezoelectric materials: State-of-the-art a decade later (2008–2018). Smart Materials and Structures, 28(11), Article 113001. https://doi.org/10.1088/1361-665X/ab36e4
Sharma, S., Kiran, R., Azad, P., & Vaish, R. (2022). A review of piezoelectric energy harvesting tiles: Available designs and future perspective. Energy Conversion and Management, 254, Article 115272. https://doi.org/10.1016/j.enconman.2022.115272
Shenck, N. S., & Paradiso, J. A. (2001). Energy scavenging with shoe-mounted piezoelectrics. IEEE Micro, 21(3), 30–42. https://doi.org/10.1109/40.928763
Shu, Y. C., Lien, I. C., & Wu, W. J. (2007). An improved analysis of the SSHI interface in piezoelectric energy harvesting. Smart Materials and Structures, 16(6), 2253–2264. https://doi.org/10.1088/0964-1726/16/6/028
Sodano, H. A., Inman, D. J., & Park, G. (2004). A review of power harvesting from vibration using piezoelectric materials. The Shock and Vibration Digest, 36(3), 197–205. https://doi.org/10.1177/0583102404043275
Song, H. J., Choi, Y.-T., Wereley, N. M., & Purekar, A. (2014). Comparison of monolithic and composite piezoelectric material–based energy harvesting devices. Journal of Intelligent Material Systems and Structures. https://doi.org/10.1177/1045389X14530592
Starner, T. (1996). Human-powered wearable computing. IBM Systems Journal, 35(3–4), 618–629. https://doi.org/10.1147/sj.353.0618
Tang, G., Wang, Z., Hu, X., Wu, S., Xu, B., Li, Z., Yan, X., Xu, F., Yuan, D., Li, P., Shi, Q., & Lee, C. (2022). A non-resonant piezoelectric–electromagnetic–triboelectric hybrid energy harvester for low-frequency human motions. Nanomaterials, 12(7), Article 1168. https://doi.org/10.3390/nano12071168
Wang, J., Qin, X., Liu, Z., Ding, G., & Cai, G. (2021). Experimental study on fatigue degradation of piezoelectric energy harvesters under equivalent traffic load conditions. International Journal of Fatigue, 150, Article 106320. https://doi.org/10.1016/j.ijfatigue.2021.106320
Wang, S.-H., Tsai, M.-C., & Wu, T.-H. (2021). The analysis and design of a high efficiency piezoelectric harvesting floor with impacting force mechanism. Crystals, 11(4), Article 380. https://doi.org/10.3390/cryst11040380
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Journal for the Advancement of Sustainable Development Goals

This work is licensed under a Creative Commons Attribution 4.0 International License.
License Statement
Creative Commons Attribution 4.0 International License (CC BY 4.0)
All articles published in the Journal for the Advancement of Sustainable Development Goals (JASDG) are licensed under the Creative Commons Attribution 4.0 International License (CC BY 4.0).
Under this license, users are free to:
-
Share — copy and redistribute the material in any medium or format;
-
Adapt — remix, transform, and build upon the material for any purpose, including commercial use;
provided that appropriate credit is given to the original author(s) and the source, a link to the license is provided, and any changes made are indicated.
The licensor cannot revoke these freedoms as long as the license terms are followed.
Authors retain copyright of their work while granting JASDG the right of first publication. The published work remains freely available to readers and may be used, distributed, reproduced, and adapted by others in accordance with the terms of the CC BY 4.0 license.
For more information about this license, please visit:
https://creativecommons.org/licenses/by/4.0/
Copyright Notice
Copyright © 2026 The Author(s).
Articles published in the Journal for the Advancement of Sustainable Development Goals (JASDG) are distributed under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0), which permits unrestricted use, distribution, reproduction, and adaptation in any medium, provided the original author(s) and source are properly credited.